TaylorMade Stealth 2 HD Driver LH
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Categories
  • Next-Day Shipping
    For All Products In Stock
  • Unmatched Service
    Satisfaction Guarantee
  • Competitive Prices
    Lowest in Europe
  • Trusted Retailer
    Trusted by Thousands
  • Authorised Dealer
    For All The Major Brands

TaylorMade Stealth 2 HD Driver LH

Available
€449,00 €649,00
You save €200,00 (30%)


visa master american express maestro ideal bancontact paypal

TaylorMade Stealth 2 HD Driver
Ultimate Forgiveness With Draw Bias Design

The TaylorMade Stealth 2 HD Driver is building on the speed producing success of the original Stealth HD Driver.

Historically, draw bias drivers have not been forgiving - as the higher CG needed to create the necessary spin led to a lower MOI. Stealth 2 HD flips this design convention on its head, delivering draw-bias with a stable feel and the highest MOI of any driver in the Stealth family.

For the last 20 years, Titanium was all the rage, but TaylorMade have always known that every material has a limit. So, they started pushing the boundaries and now they're leaving the old race behind to begin a completely new one. A race that drives beyond the here and now to raise the bar for what's possible.

The future of driver continues with the new 60X Carbon Twist Face in Stealth 2 HD. Featuring an advanced version of Inverted Cone Technology (ICT) to help maintain ball speed on off-centre strikes and increase forgiveness. It weighs 24g (2g lighter than the original Stealth HD face) and is designed to have an expanded COR area for a larger sweet spot and boosted performance across the entire face. The 60X Carbon Twist Face is encased by a polyurethane cover, featuring a revolutionary nanotexture technology. The nanotexture cover is used to fine tune launch and spin to optimise total distance regardless of playing conditions.

Carbon Reinforced Composite Rings unites the driver head into a singular force and frees up additional mass that has been strategically placed to deliver more forgiveness. Designed for speed and forgiveness the corrective tendencies of Twist Face combined with advanced ICT help maintain ball speed and accuracy on off-centre strikes. TaylorMade's trademark Thru-Slot Speed Pocket is designed to maximise ball speeds and produce additional forgiveness on low-face strikes.

The Asymmetric Inertia Generator creates advanced aerodynamics at the most critical phase of the swing - the moment right before impact. This breakthrough design increases clubhead speeds, while also allowing additional weight to be placed at the rear of the club to encourage higher MOI, optimal launch, and improved forgiveness. It is outfitted with a massive 30g rear weight to optimize MOI and forgiveness.

Fitted as standard with the premium Fujikura Speeder NX Red shaft offering a mid-high ball flight with mid/low spin designed to increase stability at impact.

TaylorMade Stealth 2 HD Driver
Ultimate Forgiveness With Draw Bias Design

The TaylorMade Stealth 2 HD Driver is building on the speed producing success of the original Stealth HD Driver.

Historically, draw bias drivers have not been forgiving - as the higher CG needed to create the necessary spin led to a lower MOI. Stealth 2 HD flips this design convention on its head, delivering draw-bias with a stable feel and the highest MOI of any driver in the Stealth family.

For the last 20 years, Titanium was all the rage, but TaylorMade have always known that every material has a limit. So, they started pushing the boundaries and now they're leaving the old race behind to begin a completely new one. A race that drives beyond the here and now to raise the bar for what's possible.

The future of driver continues with the new 60X Carbon Twist Face in Stealth 2 HD. Featuring an advanced version of Inverted Cone Technology (ICT) to help maintain ball speed on off-centre strikes and increase forgiveness. It weighs 24g (2g lighter than the original Stealth HD face) and is designed to have an expanded COR area for a larger sweet spot and boosted performance across the entire face. The 60X Carbon Twist Face is encased by a polyurethane cover, featuring a revolutionary nanotexture technology. The nanotexture cover is used to fine tune launch and spin to optimise total distance regardless of playing conditions.

Carbon Reinforced Composite Rings unites the driver head into a singular force and frees up additional mass that has been strategically placed to deliver more forgiveness. Designed for speed and forgiveness the corrective tendencies of Twist Face combined with advanced ICT help maintain ball speed and accuracy on off-centre strikes. TaylorMade's trademark Thru-Slot Speed Pocket is designed to maximise ball speeds and produce additional forgiveness on low-face strikes.

The Asymmetric Inertia Generator creates advanced aerodynamics at the most critical phase of the swing - the moment right before impact. This breakthrough design increases clubhead speeds, while also allowing additional weight to be placed at the rear of the club to encourage higher MOI, optimal launch, and improved forgiveness. It is outfitted with a massive 30g rear weight to optimize MOI and forgiveness.

Fitted as standard with the premium Fujikura Speeder NX Red shaft offering a mid-high ball flight with mid/low spin designed to increase stability at impact.

TaylorMade Stealth 2 HD Driver
Ultimate Forgiveness With Draw Bias Design

High Draw Design With Fargiveness:
Historically, draw bias drivers have not been forgiving - as the higher CG needed to create the necessary spin led to a lower MOI. Stealth 2 HD flips this design convention on its head, delivering draw-bias with a stable feel and the highest MOI of any driver in the Stealth family.

60X Carbon Twist Face:
The future of driver performance continues with the 60X Carbon Twist Face in Stealth 2 HD. Featuring an advanced version of Inverted Cone Technology (ICT) to help maintain ball speed on off-centre strikes and increase forgiveness. It weighs 24g (2g lighter than the original Stealth face) and is designed to have an expanded COR area for a larger sweet spot and boosted performance across the entire face.

Carbon Reinforced Composite Rings:
Carbon Reinforced Composite Rings unites the driver head into a singular force and frees up additional mass that has been strategically placed to deliver more forgiveness.

Nanotexture Cover:
The 60X Carbon Twist Face is encased by a polyurethane cover, featuring a revolutionary nanotexture technology. The nanotexture cover is used to fine tune launch and spin to optimise total distance regardless of playing conditions.

Asymmetric Inertia Generator:
The Inertia Generator remains the foundational source of refined aerodynamic properties. The result is a slippery-fast head shape that aids in swing speed generation on the downswing for golfers at every level. It is outfitted with a massive 30g rear weight to optimize MOI and forgiveness.

Thru-Slot Speed Pocket:
TaylorMade's trademark Thru-Slot Speed Pocket is designed to maximise ball speeds and produce additional forgiveness on low-face strikes.

Premium Shaft Option:
Fitted as standard with the premium Fujikura Speeder NX Red shaft offering a mid-high ball flight with mid/low spin designed to increase stability at impact.

TaylorMade Stealth 2 HD Driver
Ultimate Forgiveness With Draw Bias Design

Body Construction: 
Titanium & Carbon Fibre

Crown Construction: 
Carbon Fibre

Face: 
Carbon Fibre

Face Angle: 
Adjustable

Loft Angle: 
Adjustable

Shaft: 
Fujikura Speeder NX Red

Shaft Length: 
45.75 Inches

Grip: 
Golf Pride Z-Grip Plus2 Black/Red

Head Size: 
460cc

Headcover Included: 
Yes

Wrench Tool Included: 
Yes

TaylorMade Stealth 2 HD Golf Driver Spec Chart

TaylorMade Stealth 2 HD Driver
Ultimate Forgiveness With Draw Bias Design

TaylorMade Stealth 2 HD Driver
Ultimate Forgiveness With Draw Bias Design

Galaxy Golf
Spain's Premier Custom Fit Retailer

We offer the choice of standard or custom fit options, where this product can be built to suit your personal requirements. To get custom fitted instore or to order this product as custom fit specifications please contact us on +34 633 46 75 12 or alternatively you can email us at onlinesales@galaxygolfco.com

As a leading custom fit retailer, we aim to deliver your custom fit order as quickly as possible. All custom fit equipment is built at the manufacturer's custom fit factory to ensure the highest quality of build, which may take up to 2-4 weeks as per the manufacturer's lead time.